FTDI microHAM USB Interface DB9 how to download and install the driver

microHAM USB Interface DB9 is a USB Universal Serial Bus device. This Windows driver was developed by FTDI. In order to make sure you are downloading the exact right driver the hardware id is USB/VID_0403&PID_EEED.

1. FTDI microHAM USB Interface DB9 driver - how to install it manually

1. Download the setup file for FTDI microHAM USB Interface DB9 driver from the link below. This download link is for the driver version 2.06.00 dated 2009-10-22.
2.  
3. Run the driver setup file from a Windows account with the highest privileges (rights). If your User Access Control (UAC) is started then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which should be quite easy to follow. The driver setup wizard will scan your PC for compatible devices and will install the driver.
6.  
7. Restart your computer and enjoy the fresh driver, it is as simple as that.
8.  

This driver is not digitally signed.

This driver was rated with an average of 3.1 stars by 37759 users.

2. The easy way: using DriverMax to install FTDI microHAM USB Interface DB9 driver

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you find the FTDI microHAM USB Interface DB9 driver. Click the Update button.
4.  
5. That's it, you installed your first driver!
6.