Hewlett-Packard hp psc 1310 series DOT4 - two ways of downloading and installing the driver

hp psc 1310 series DOT4 is a Dot4 hardware device. This driver was developed by Hewlett-Packard. The hardware id of this driver is dot4usb/vid_03f0&pid_3f11&mi_02&dot4; this string has to match your hardware.

1. Install Hewlett-Packard hp psc 1310 series DOT4 driver manually

1. You can download from the link below the driver installer file for the Hewlett-Packard hp psc 1310 series DOT4 driver. The archive contains version 11.1.1.7 dated 2014-05-05 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is enabled please accept of the driver and run the setup with administrative rights.
4.  
5. Follow the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver was not digitally signed.

This driver was installed by many users and received an average rating of 3.6 stars out of 26656 votes.

2. How to use DriverMax to install Hewlett-Packard hp psc 1310 series DOT4 driver

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Search the list until you locate the Hewlett-Packard hp psc 1310 series DOT4 driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.