ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.



Modem - EVDO card Incorporated. - JET_EVDO Modem Device #4 Computer Driver Updates



Device types / Modem / EVDO card Incorporated. / JET_EVDO Modem Device #4


link JET_EVDO Modem Device
EVDO card Incorporated.
Modem
2.0.5.3
11-4-2009
Windows 7 (6.1) 32 bit
Driver Popularity
 
link JET_EVDO Modem Device #4
EVDO card Incorporated.
Modem
2.0.5.3
11-4-2009
Windows 7 (6.1) 32 bit
Driver Popularity
 



Description extracted from Wikipedia:

thumb|A Kyocera PC Card EV-DO [[router (computing)|router with Wi-Fi]]thumb|BlackBerry Style (9670 series) smartphone displaying '1XEV' as the service status as highlighted in the upper right corner. Evolution-Data Optimized EV-DO , EVDO , etc.) is a telecommunications standard for the wireless transmission of data through radio signals, typically for broadband Internet access. EV-DO is an evolution of the CDMA2000 (IS-2000) standard which supports high data rates and can be deployed alongside a wireless carrier's voice services. It uses advanced multiplexing techniques including code division multiple access (CDMA) as well as time division multiplexing (TDM) to maximize throughput. It is a part of the CDMA2000 family of standards and has been adopted by many mobile phone service providers around the world particularly those previously employing CDMA networks. It is also used on the Globalstar satellite phone network. EV-DO service was discontinued in much of Canada in 2015. An EV-DO channel has a bandwidth of 1.25 MHz, the same bandwidth size that IS-95A (IS-95) and IS-2000 (1xRTT) use, though the channel structure is very different. The back-end network is entirely packet-based, and is not constrained by restrictions typically present on a circuit switched network. The EV-DO feature of CDMA2000 networks provides access to mobile devices with forward link air interface speeds of up to 2.4 Mbit/s with Rel. 0 and up to 3.1 Mbit/s with Rev. A. The reverse link rate for Rel. 0 can operate up to 153 kbit/s, while Rev. A can operate at up to 1.8 Mbit/s. It was designed to be operated end-to-end as an IP based network, and can support any application which can operate on such a network and bit rate constraints.