Download and install National Instruments USB-6366 32 MS RTSI driver

USB-6366 32 MS RTSI is a DAQ Device hardware device. The Windows version of this driver was developed by National Instruments. In order to make sure you are downloading the exact right driver the hardware id is USB/VID_3923&PID_7568&REV_0100.

1. National Instruments USB-6366 32 MS RTSI driver - how to install it manually

1. You can download from the link below the driver installer file for the National Instruments USB-6366 32 MS RTSI driver. The archive contains version 22.5.0.49247 dated 2022-07-07 of the driver.
2.  
3. Run the driver installer file from a user account with the highest privileges (rights). If your User Access Control (UAC) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver was not digitally signed.

This driver was installed by many users and received an average rating of 3.9 stars out of 37632 votes.

2. The easy way: using DriverMax to install National Instruments USB-6366 32 MS RTSI driver

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's follow a few steps!

1. Start DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you locate the National Instruments USB-6366 32 MS RTSI driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.