Fresco Logic Thin2000 USB Display Adapter how to download and install the driver

Thin2000 USB Display Adapter is a AVClass hardware device. This Windows driver was developed by Fresco Logic. In order to make sure you are downloading the exact right driver the hardware id is USB/VID_1D5C&PID_1FFE.

1. Fresco Logic Thin2000 USB Display Adapter - install the driver manually

1. You can download from the link below the driver installer file for the Fresco Logic Thin2000 USB Display Adapter driver. The archive contains version 1.1.295.00 dated 2014-10-30 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your UAC (User Access Control) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your PC in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is not digitally signed.

This driver was rated with an average of 3.8 stars by 38702 users.

2. The easy way: using DriverMax to install Fresco Logic Thin2000 USB Display Adapter driver

The advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you find the Fresco Logic Thin2000 USB Display Adapter driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.