Download and install Marvell SysKonnect SK-9E92 1000Base-LX Dual Port Server Adapter, PCI-Express, 2 Fiber LX/LC driver

SysKonnect SK-9E92 1000Base-LX Dual Port Server Adapter, PCI-Express, 2 Fiber LX/LC is a Network Adapters hardware device. The developer of this driver was Marvell. The hardware id of this driver is PCI/VEN_1148&DEV_9E00&SUBSYS_92001148; this string has to match your hardware.

1. Marvell SysKonnect SK-9E92 1000Base-LX Dual Port Server Adapter, PCI-Express, 2 Fiber LX/LC driver - how to install it manually

1. You can download from the link below the driver setup file for the Marvell SysKonnect SK-9E92 1000Base-LX Dual Port Server Adapter, PCI-Express, 2 Fiber LX/LC driver. The archive contains version 11.22.3.9 dated 2009-09-28 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your User Access Control Service (UAC) is started please accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is digitally signed by Marvell.
The file size of this driver is 523502 bytes (511.23 KB)
This driver was rated with an average of 4.2 stars by 85902 users.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to use DriverMax to install Marvell SysKonnect SK-9E92 1000Base-LX Dual Port Server Adapter, PCI-Express, 2 Fiber LX/LC driver

The most important advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver using DriverMax? Let's take a look!

1. Start DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you locate the Marvell SysKonnect SK-9E92 1000Base-LX Dual Port Server Adapter, PCI-Express, 2 Fiber LX/LC driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.