Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 - two ways of downloading and installing the driver

SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 is a Network Adapters device. This Windows driver was developed by Marvell. The hardware id of this driver is PCI/VEN_1148&DEV_4320&SUBSYS_50611148.

1. Install Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver manually

1. You can download from the link below the driver installer file for the Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver. The archive contains version 11.45.4.3 released on 2012-03-23 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your User Access Control (UAC) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed.
Download size of the driver: 294803 bytes (287.89 KB)
This driver received an average rating of 4.6 stars out of 57917 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows Vista 32 bits

2. How to install Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver using DriverMax

The advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver with DriverMax? Let's take a look!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you find the Marvell SysKonnect SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter, PCI64, Fiber SX/VF-45 driver. Click the Update button.
4.  
5. Finished installing the driver!
6.