Marvell SysKonnect SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter, PCI64, Fiber LX/SC - two ways of downloading and installing the driver

SysKonnect SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter, PCI64, Fiber LX/SC is a Network Adapters device. The developer of this driver was Marvell. The hardware id of this driver is PCI/VEN_1148&DEV_4320&SUBSYS_50411148; this string has to match your hardware.

1. Marvell SysKonnect SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter, PCI64, Fiber LX/SC driver - how to install it manually

1. You can download from the link below the driver installer file for the Marvell SysKonnect SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter, PCI64, Fiber LX/SC driver. The archive contains version 10.60.7.3 released on 2008-05-13 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

Marvell applied a digital signature to this driver.
File size of the driver: 261235 bytes (255.11 KB)
This driver was installed by many users and received an average rating of 4.1 stars out of 75280 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows Server 2003 32 bits
• This driver works on Windows XP 32 bits

2. Using DriverMax to install Marvell SysKonnect SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter, PCI64, Fiber LX/SC driver

The advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How easy can you install a driver with DriverMax? Let's see!

1. Open DriverMax and click on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you locate the Marvell SysKonnect SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter, PCI64, Fiber LX/SC driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.