Deutsche Telekom AG Speedport W 102 Stick IEEE 802.11n USB 2.0 Adapter how to download and install the driver

Speedport W 102 Stick IEEE 802.11n USB 2.0 Adapter is a Network Adapters hardware device. The Windows version of this driver was developed by Deutsche Telekom AG. USB/VID_083A&PID_D522 is the matching hardware id of this device.

1. Install Deutsche Telekom AG Speedport W 102 Stick IEEE 802.11n USB 2.0 Adapter driver manually

1. You can download from the link below the driver installer file for the Deutsche Telekom AG Speedport W 102 Stick IEEE 802.11n USB 2.0 Adapter driver. The archive contains version 5.01.11.0000 dated 2014-02-14 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your UAC (User Access Control) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

There is no digital signature available for this driver.

This driver received an average rating of 3.5 stars out of 11238 votes.

2. The easy way: using DriverMax to install Deutsche Telekom AG Speedport W 102 Stick IEEE 802.11n USB 2.0 Adapter driver

The advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's see!

1. Open DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you find the Deutsche Telekom AG Speedport W 102 Stick IEEE 802.11n USB 2.0 Adapter driver. Click on Update.
4.  
5. Finished installing the driver!
6.