Download and install Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver

Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller is a SCSI Adapter device. This Windows driver was developed by Intel. The hardware id of this driver is PCI/VEN_8086&DEV_2822&SUBSYS_2A7D103C.

1. How to manually install Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver

1. You can download from the link below the driver setup file for the Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver. The archive contains version 8.7.0.1007 released on 2008-12-04 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your UAC (User Access Control) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

Intel applied a digital signature to this driver.
Size of this driver: 238488 bytes (232.90 KB)
This driver was installed by many users and received an average rating of 4.2 stars out of 89736 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Using DriverMax to install Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver

The advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver with DriverMax? Let's take a look!

1. Start DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver. Click the Update button.
4.  
5. Enjoy using the updated driver! :)
6.