Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver download and installation

Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller is a SCSI Adapter device. This Windows driver was developed by Intel. The hardware id of this driver is PCI/VEN_8086&DEV_2822&SUBSYS_2A55103C; this string has to match your hardware.

1. Manually install Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver

1. You can download from the link below the driver setup file for the Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver. The archive contains version 8.7.0.1007 dated 2008-12-04 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed by Intel.
Size of this driver: 238488 bytes (232.90 KB)
This driver was rated with an average of 4.4 stars by 89350 users.
This driver was released for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Installing the Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver using DriverMax: the easy way

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of available driver updates. Search the list until you find the Intel Intel R ICH8R/ICH9R/ICH10R/DO SATA RAID Controller driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.