Hewlett-Packard HP Color LaserJet 2840 Series DOT4USB how to download and install the driver

HP Color LaserJet 2840 Series DOT4USB is a USB Universal Serial Bus hardware device. This Windows driver was developed by Hewlett-Packard. The hardware id of this driver is USB/Vid_03f0&Pid_2817&rev_0100&mi_00; this string has to match your hardware.

1. Install Hewlett-Packard HP Color LaserJet 2840 Series DOT4USB driver manually

1. You can download from the link below the driver installer file for the Hewlett-Packard HP Color LaserJet 2840 Series DOT4USB driver. The archive contains version 10.1.1.3 dated 2005-10-22 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your UAC (User Access Control) is enabled please accept of the driver and run the setup with administrative rights.
4.  
5. Follow the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

There is no digital signature available for this driver.

This driver was rated with an average of 3.1 stars by 18994 users.

2. How to install Hewlett-Packard HP Color LaserJet 2840 Series DOT4USB driver using DriverMax

The most important advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Search the list until you locate the Hewlett-Packard HP Color LaserJet 2840 Series DOT4USB driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.