Driver for Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr - downloading and installing it

HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr is a Network Adapters hardware device. The Windows version of this driver was developed by Emulex. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_19A2&DEV_0710&SUBSYS_3392103C.

1. Manually install Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver

1. Download the setup file for Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver from the location below. This is the download link for the driver version 4.1.370.0 dated 2012-02-06.
2.  
3. Run the driver installation file from a Windows account with the highest privileges (rights). If your User Access Control (UAC) is started then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be pretty straightforward. The driver setup wizard will scan your PC for compatible devices and will install the driver.
6.  
7. Restart your computer and enjoy the new driver, as you can see it was quite smple.
8.  

This driver is digitally signed.
Driver file size: 405002 bytes (395.51 KB)
Driver rating 4.9 stars out of 5876 votes.
This driver is compatible with the following versions of Windows:

• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Installing the Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver using DriverMax: the easy way

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How can you install a driver with DriverMax? Let's take a look!

1. Start DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.