Download and install Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver

HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr is a Network Adapters hardware device. The developer of this driver was Emulex. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_19A2&DEV_0710&SUBSYS_3392103C.

1. Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver - how to install it manually

1. You can download from the link below the driver setup file for the Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver. The archive contains version 4.0.317.0 dated 2011-07-25 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

Emulex applied a digital signature to this driver.
Driver file size: 395939 bytes (386.66 KB)
This driver received an average rating of 4 stars out of 4513 votes.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows XP 64 bits

2. Installing the Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver using DriverMax: the easy way

The advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the Emulex HP AT094A 10GbE-SFP PCIe 2p 8Gb FC and 2p 1/10GbE Adtr driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.