Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver download and installation

HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr is a Network Adapters hardware device. This driver was developed by Emulex. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_19A2&DEV_0718&SUBSYS_3391103C.

1. Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr - install the driver manually

1. Download the setup file for Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver from the link below. This is the download link for the driver version 4.2.390.6 released on 2012-10-25.
2.  
3. Run the driver setup file from a Windows account with the highest privileges (rights). If your UAC (User Access Control) is running then you will have to accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be pretty easy to follow. The driver setup wizard will analyze your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the new driver, it is as simple as that.
8.  

This driver is digitally signed by the manufacturer.
Size of this driver: 422524 bytes (412.62 KB)
This driver was rated with an average of 4.8 stars by 90395 users.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Using DriverMax to install Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Start DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you locate the Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver. Click the Update button.
4.  
5. Finished installing the driver!
6.