Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver download and installation

HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr is a Network Adapters device. The Windows version of this driver was developed by Emulex. The hardware id of this driver is PCI/VEN_19A2&DEV_0718&SUBSYS_3391103C.

1. Install Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver manually

1. You can download from the link below the driver setup file for the Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver. The archive contains version 10.0.718.26 dated 2014-01-02 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your User Access Control (UAC) is started please accept of the driver and run the setup with administrative rights.
4.  
5. Follow the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is digitally signed by the manufacturer.
File size of the driver: 644257 bytes (629.16 KB)
This driver received an average rating of 4.8 stars out of 68382 votes.
This driver was released for the following versions of Windows:

• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to install Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver using DriverMax

The advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver using DriverMax? Let's see!

1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you find the Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver. Click the Update button.
4.  
5. Finished installing the driver!
6.