Driver for Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr - downloading and installing it

HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr is a Network Adapters device. This Windows driver was developed by Emulex. The hardware id of this driver is PCI/VEN_19A2&DEV_0710&SUBSYS_3391103C.

1. Install Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver manually

1. You can download from the link below the driver installer file for the Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver. The archive contains version 4.0.317.0 dated 2011-07-25 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is running please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will scan your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed by the manufacturer.
Size of this driver: 395939 bytes (386.66 KB)
This driver was installed by many users and received an average rating of 4.7 stars out of 4504 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows XP 64 bits

2. The easy way: using DriverMax to install Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver

The most important advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How easy can you install a driver with DriverMax? Let's take a look!

1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Search the list until you find the Emulex HP AT093A 10GbE-SFP PCIe 1p 8Gb FC and 1p 1/10GbE Adtr driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.