Download and install PLANEX COMMUNICATIONS INC GW-USUltra300 MAC1 driver

GW-USUltra300 MAC1 is a Network Adapters hardware device. This Windows driver was developed by PLANEX COMMUNICATIONS INC. In order to make sure you are downloading the exact right driver the hardware id is USB/VID_2019&PID_4904&REV_0000&MI_01.

1. Install PLANEX COMMUNICATIONS INC GW-USUltra300 MAC1 driver manually

1. You can download from the link below the driver setup file for the PLANEX COMMUNICATIONS INC GW-USUltra300 MAC1 driver. The archive contains version 1027.4.0630.2015 dated 2016-03-04 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your UAC (User Access Control) is running please accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

There is no digital signature available for this driver.
Download size of the driver: 1524275 bytes (1.45 MB)
Driver rating 3.1 stars out of 41058 votes.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 8.1 32 bits
• This driver works on Windows 10 32 bits
• This driver works on Windows 11 32 bits

2. Using DriverMax to install PLANEX COMMUNICATIONS INC GW-USUltra300 MAC1 driver

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver with DriverMax? Let's follow a few steps!

1. Start DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you locate the PLANEX COMMUNICATIONS INC GW-USUltra300 MAC1 driver. Click on Update.
4.  
5. That's it, you installed your first driver!
6.