Fresco Logic Fresco Logic xHCI USB3 Root Hub driver download and installation

Fresco Logic xHCI USB3 Root Hub is a USB Universal Serial Bus hardware device. This Windows driver was developed by Fresco Logic. The hardware id of this driver is FLUSB/ROOT_HUB_FL30_165A103C.

1. Fresco Logic Fresco Logic xHCI USB3 Root Hub driver - how to install it manually

1. You can download from the link below the driver setup file for the Fresco Logic Fresco Logic xHCI USB3 Root Hub driver. The archive contains version 3.5.88.0 dated 2012-09-21 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver was not digitally signed.

This driver was rated with an average of 3.8 stars by 68434 users.

2. Using DriverMax to install Fresco Logic Fresco Logic xHCI USB3 Root Hub driver

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the Fresco Logic Fresco Logic xHCI USB3 Root Hub driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.