Fresco Logic Fresco Logic xHCI USB3 Root Hub driver download and installation

Fresco Logic xHCI USB3 Root Hub is a USB Universal Serial Bus device. This driver was developed by Fresco Logic. The hardware id of this driver is FLUSB/ROOT_HUB_FL30_11001B73; this string has to match your hardware.

1. Install Fresco Logic Fresco Logic xHCI USB3 Root Hub driver manually

1. You can download from the link below the driver installer file for the Fresco Logic Fresco Logic xHCI USB3 Root Hub driver. The archive contains version 3.5.107.0 dated 2014-03-18 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is started please accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

There is no digital signature available for this driver.

This driver was rated with an average of 3.7 stars by 29351 users.

2. Installing the Fresco Logic Fresco Logic xHCI USB3 Root Hub driver using DriverMax: the easy way

The most important advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver with DriverMax? Let's see!

1. Open DriverMax and press on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you find the Fresco Logic Fresco Logic xHCI USB3 Root Hub driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.