Fresco Logic Fresco Logic xHCI USB3 Root Hub driver download and installation

Fresco Logic xHCI USB3 Root Hub is a USB Universal Serial Bus hardware device. The Windows version of this driver was developed by Fresco Logic. The hardware id of this driver is FLUSB/ROOT_HUB_FL30_05111025.

1. Fresco Logic Fresco Logic xHCI USB3 Root Hub - install the driver manually

1. You can download from the link below the driver installer file for the Fresco Logic Fresco Logic xHCI USB3 Root Hub driver. The archive contains version 3.5.106.0 dated 2014-01-09 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is not digitally signed.

This driver was rated with an average of 3.4 stars by 28644 users.

2. The easy way: using DriverMax to install Fresco Logic Fresco Logic xHCI USB3 Root Hub driver

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How easy can you install a driver with DriverMax? Let's see!

1. Open DriverMax and click on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you locate the Fresco Logic Fresco Logic xHCI USB3 Root Hub driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.