Fresco Logic Fresco Logic eMarker Programmer 2 how to download and install the driver

Fresco Logic eMarker Programmer 2 is a USB Universal Serial Bus hardware device. This Windows driver was developed by Fresco Logic. USB/VID_1D5C&PID_1788 is the matching hardware id of this device.

1. Manually install Fresco Logic Fresco Logic eMarker Programmer 2 driver

1. You can download from the link below the driver installer file for the Fresco Logic Fresco Logic eMarker Programmer 2 driver. The archive contains version 3.0.026.00 dated 2020-12-04 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your UAC (User Access Control) is enabled please accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is digitally signed by Fresco Logic.
The file size of this driver is 13127 bytes (12.82 KB)
This driver was rated with an average of 4.8 stars by 89111 users.
This driver will work for the following versions of Windows:

• This driver works on Windows 2000 32 bits
• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 32 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 32 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 32 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 32 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 32 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 32 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 32 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 32 bits
• This driver works on Windows 11 64 bits

2. How to use DriverMax to install Fresco Logic Fresco Logic eMarker Programmer 2 driver

The advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How easy can you install a driver with DriverMax? Let's see!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Search the list until you locate the Fresco Logic Fresco Logic eMarker Programmer 2 driver. Click on Update.
4.  
5. That's all, the driver is now installed!
6.