Emulex Emulex OneConnect OCl11102-LOM 2-port PCIe 10GbE Converged Network Adapter driver download and installation

Emulex OneConnect OCl11102-LOM 2-port PCIe 10GbE Converged Network Adapter is a SCSI Adapter hardware device. The developer of this driver was Emulex. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_19A2&DEV_0712&SUBSYS_11C91734.

1. Emulex Emulex OneConnect OCl11102-LOM 2-port PCIe 10GbE Converged Network Adapter - install the driver manually

1. You can download from the link below the driver setup file for the Emulex Emulex OneConnect OCl11102-LOM 2-port PCIe 10GbE Converged Network Adapter driver. The archive contains version 11.1.185.0 dated 2016-08-09 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is enabled please accept of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is digitally signed.
Download size of the driver: 193185 bytes (188.66 KB)
This driver was rated with an average of 4.3 stars by 76576 users.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to install Emulex Emulex OneConnect OCl11102-LOM 2-port PCIe 10GbE Converged Network Adapter driver using DriverMax

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the Emulex Emulex OneConnect OCl11102-LOM 2-port PCIe 10GbE Converged Network Adapter driver. Click the Update button.
4.  
5. Enjoy using the updated driver! :)
6.