Download and install Emulex Emulex OneConnect OCe14102-UT, iSCSI Initiator driver

Emulex OneConnect OCe14102-UT, iSCSI Initiator is a SCSI Adapter device. This Windows driver was developed by Emulex. The hardware id of this driver is PCI/VEN_10DF&DEV_0722&SUBSYS_E80610DF; this string has to match your hardware.

1. Emulex Emulex OneConnect OCe14102-UT, iSCSI Initiator - install the driver manually

1. You can download from the link below the driver installer file for the Emulex Emulex OneConnect OCe14102-UT, iSCSI Initiator driver. The archive contains version 11.1.185.0 dated 2016-08-09 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your UAC (User Access Control) is running please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will scan your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your PC in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is digitally signed.
The file size of this driver is 193185 bytes (188.66 KB)
Driver rating 4.7 stars out of 36825 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Using DriverMax to install Emulex Emulex OneConnect OCe14102-UT, iSCSI Initiator driver

The most important advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date. How easy can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the Emulex Emulex OneConnect OCe14102-UT, iSCSI Initiator driver. Click on Update.
4.  
5. That's it, you installed your first driver!
6.