Emulex Emulex OneConnect OCe14102-U-T7, iSCSI Initiator - two ways of downloading and installing the driver

Emulex OneConnect OCe14102-U-T7, iSCSI Initiator is a SCSI Adapter hardware device. This driver was developed by Emulex. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_10DF&DEV_0722&SUBSYS_E8F710DF.

1. Emulex Emulex OneConnect OCe14102-U-T7, iSCSI Initiator - install the driver manually

1. You can download from the link below the driver setup file for the Emulex Emulex OneConnect OCe14102-U-T7, iSCSI Initiator driver. The archive contains version 10.2.254.0 dated 2014-04-18 of the driver.
2.  
3. Run the driver installer file from a user account with the highest privileges (rights). If your User Access Control (UAC) is enabled please accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

This driver is digitally signed by the manufacturer.
The file size of this driver is 207892 bytes (203.02 KB)
This driver was rated with an average of 4.4 stars by 83123 users.
This driver is compatible with the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to use DriverMax to install Emulex Emulex OneConnect OCe14102-U-T7, iSCSI Initiator driver

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the Emulex Emulex OneConnect OCe14102-U-T7, iSCSI Initiator driver. Click the Update button.
4.  
5. That's it, you installed your first driver!
6.