Download and install Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver

Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM is a SCSI Adapter device. The developer of this driver was Emulex. The hardware id of this driver is PCI/VEN_19A2&DEV_0712&SUBSYS_E70C10DF.

1. Install Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver manually

1. Download the driver setup file for Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver from the location below. This download link is for the driver version 10.2.254.0 dated 2014-04-18.
2.  
3. Run the driver setup file from a Windows account with the highest privileges (rights). If your User Access Control (UAC) is started then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be quite easy to follow. The driver setup wizard will scan your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the fresh driver, it is as simple as that.
8.  

This driver is digitally signed by the manufacturer.
Size of this driver: 207892 bytes (203.02 KB)
This driver received an average rating of 4 stars out of 83715 votes.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. The easy way: using DriverMax to install Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver

The advantage of using DriverMax is that it will install the driver for you in the easiest possible way and it will keep each driver up to date. How easy can you install a driver using DriverMax? Let's see!

1. Open DriverMax and push on the yellow button named ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Search the list until you locate the Emulex Emulex OCl11104-F2-X Virtual Fabric Adapter 2-port 10Gb and 2-port 1Gb LOM driver. Click the Update button.
4.  
5. Finished installing the driver!
6.