OEM EPhone 1xEVDO Diagnostics Interface - two ways of downloading and installing the driver

EPhone 1xEVDO Diagnostics Interface is a Ports hardware device. This Windows driver was developed by OEM. The hardware id of this driver is USB/VID_109B&PID_5006&MI_00; this string has to match your hardware.

1. OEM EPhone 1xEVDO Diagnostics Interface - install the driver manually

1. You can download from the link below the driver setup file for the OEM EPhone 1xEVDO Diagnostics Interface driver. The archive contains version 2.0.6.7 dated 2012-04-13 of the driver.
2.  
3. Run the driver installer file from a user account with the highest privileges (rights). If your User Access Control Service (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your PC in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver was not digitally signed.

This driver was rated with an average of 3.3 stars by 23432 users.

2. Using DriverMax to install OEM EPhone 1xEVDO Diagnostics Interface driver

The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver with DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of detected driver updates. Scroll the list down until you locate the OEM EPhone 1xEVDO Diagnostics Interface driver. Click on Update.
4.  
5. Finished installing the driver!
6.