Download and install DELL DELL PERC 6/i Adapter RAID Controller driver

DELL PERC 6/i Adapter RAID Controller is a SCSI Adapter hardware device. This driver was developed by DELL. The hardware id of this driver is PCI/VEN_1000&DEV_0060&SUBSYS_1F0B1028; this string has to match your hardware.

1. Manually install DELL DELL PERC 6/i Adapter RAID Controller driver

1. You can download from the link below the driver setup file for the DELL DELL PERC 6/i Adapter RAID Controller driver. The archive contains version 2.24.0.32 dated 2009-01-19 of the driver.
2.  
3. Start the driver installer file from a user account with the highest privileges (rights). If your User Access Control Service (UAC) is started please accept of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be pretty easy to follow. The driver installation wizard will scan your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

There is no digital signature available for this driver.

This driver was rated with an average of 3.4 stars by 22151 users.

2. The easy way: using DriverMax to install DELL DELL PERC 6/i Adapter RAID Controller driver

The advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date, not just this one. How can you install a driver using DriverMax? Let's follow a few steps!

1. Open DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of driver updates. Scroll the list down until you locate the DELL DELL PERC 6/i Adapter RAID Controller driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.