ad-block

Advertising seems to be blocked by your browser.

The ads help us provide this software and web site to you for free.

Please support our project by allowing our site to show ads.



LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 - two ways of downloading and installing the driver


Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 is a SCSI Adapter device. The Windows version of this driver was developed by LSI Corp.. In order to make sure you are downloading the exact right driver the hardware id is PCI/VEN_1000&DEV_0073&SUBSYS_00B71137.

1. How to manually install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver


  1. Download the setup file for LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver from the location below. This download link is for the driver version 6.714.18.00 dated 2018-10-22.
  2.  
  3. Start the driver setup file from a Windows account with the highest privileges (rights). If your UAC (User Access Control) is enabled then you will have to confirm the installation of the driver and run the setup with administrative rights.
  4.  
  5. Go through the driver installation wizard, which should be quite straightforward. The driver installation wizard will scan your PC for compatible devices and will install the driver.
  6.  
  7. Restart your PC and enjoy the fresh driver, as you can see it was quite smple.
  8.  
LSI Corp. applied a digital signature to this driver.
Size of this driver: 85829 bytes (83.82 KB)
This driver was installed by many users and received an average rating of 4.5 stars out of 89600 votes.
This driver will work for the following versions of Windows:

  • This driver works on Windows 2000 32 bits
  • This driver works on Windows Server 2003 32 bits
  • This driver works on Windows XP 32 bits
  • This driver works on Windows Vista 32 bits
  • This driver works on Windows 7 32 bits
  • This driver works on Windows 8 32 bits
  • This driver works on Windows 8.1 32 bits
  • This driver works on Windows 10 32 bits
  • This driver works on Windows 11 32 bits



2. How to use DriverMax to install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver


The most important advantage of using DriverMax is that it will setup the driver for you in the easiest possible way and it will keep each driver up to date. How can you install a driver using DriverMax? Let's follow a few steps!

  1. Start DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your computer.
  2.  
  3. Take a look at the list of detected driver updates. Search the list until you find the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver. Click on Update.
  4.  
  5. That's all, the driver is now installed!
  6.  

Drivers