LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 - two ways of downloading and installing the driver

Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 is a SCSI Adapter device. The Windows version of this driver was developed by LSI Corp.. The hardware id of this driver is PCI/VEN_1000&DEV_0073&SUBSYS_00B71137.

1. LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 - install the driver manually

1. You can download from the link below the driver setup file for the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver. The archive contains version 6.714.05.00 dated 2017-04-18 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your User Access Control Service (UAC) is running please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Follow the driver setup wizard, which will guide you; it should be quite easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes restart your PC in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is digitally signed by the manufacturer.
Size of this driver: 157019 bytes (153.34 KB)
This driver received an average rating of 4.9 stars out of 67017 votes.
This driver will work for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to use DriverMax to install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver

The most important advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How easy can you install a driver with DriverMax? Let's follow a few steps!

1. Start DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of available driver updates. Search the list until you find the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver. Click the Update button.
4.  
5. Finished installing the driver!
6.