Driver for LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 - downloading and installing it

Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 is a SCSI Adapter device. This driver was developed by LSI Corp.. The hardware id of this driver is PCI/VEN_1000&DEV_0073&SUBSYS_00B71137; this string has to match your hardware.

1. LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver - how to install it manually

1. Download the driver setup file for LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver from the link below. This download link is for the driver version 6.703.03.00 released on 2014-03-13.
2.  
3. Run the driver installation file from a Windows account with the highest privileges (rights). If your UAC (User Access Control) is running then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which should be pretty easy to follow. The driver setup wizard will scan your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the updated driver, it is as simple as that.
8.  

LSI Corp. applied a digital signature to this driver.
Driver file size: 128905 bytes (125.88 KB)
Driver rating 4.8 stars out of 74349 votes.
This driver is compatible with the following versions of Windows:

• This driver works on Windows 2000 32 bits
• This driver works on Windows Server 2003 32 bits
• This driver works on Windows XP 32 bits
• This driver works on Windows Vista 32 bits
• This driver works on Windows 7 32 bits
• This driver works on Windows 8 32 bits
• This driver works on Windows 8.1 32 bits
• This driver works on Windows 10 32 bits
• This driver works on Windows 11 32 bits

2. How to use DriverMax to install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver

The advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver using DriverMax? Let's follow a few steps!

1. Start DriverMax and push on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you locate the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver. Click the Update button.
4.  
5. That's it, you installed your first driver!
6.