Driver for LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 - downloading and installing it

Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 is a SCSI Adapter device. This driver was developed by LSI Corp.. PCI/VEN_1000&DEV_0073&SUBSYS_00B71137 is the matching hardware id of this device.

1. LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver - how to install it manually

1. You can download from the link below the driver installer file for the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver. The archive contains version 6.702.07.00 dated 2013-11-18 of the driver.
2.  
3. Run the driver installer file from a user account with administrative rights. If your User Access Control (UAC) is started please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which will guide you; it should be quite easy to follow. The driver installation wizard will analyze your computer and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your PC in order to use the updated driver. It is as simple as that to install a Windows driver!
8.  

LSI Corp. applied a digital signature to this driver.
File size of the driver: 137170 bytes (133.96 KB)
This driver was rated with an average of 5 stars by 89634 users.
This driver is compatible with the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver using DriverMax

The most important advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date. How can you install a driver using DriverMax? Let's see!

1. Start DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of available driver updates. Scroll the list down until you locate the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C240 with RAID 0/1/10 driver. Click the Update button.
4.  
5. That's all, the driver is now installed!
6.