LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 - two ways of downloading and installing the driver

Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 is a SCSI Adapter hardware device. The Windows version of this driver was developed by LSI Corp.. The hardware id of this driver is PCI/VEN_1000&DEV_0073&SUBSYS_00B61137.

1. LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 - install the driver manually

1. Download the setup file for LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 driver from the link below. This is the download link for the driver version 6.711.06.00 dated 2016-02-04.
2.  
3. Start the driver installation file from a Windows account with administrative rights. If your User Access Control (UAC) is enabled then you will have to confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver installation wizard, which should be pretty straightforward. The driver installation wizard will analyze your PC for compatible devices and will install the driver.
6.  
7. Restart your PC and enjoy the fresh driver, it is as simple as that.
8.  

This driver is digitally signed.
File size of the driver: 154155 bytes (150.54 KB)
This driver received an average rating of 4.3 stars out of 83008 votes.
This driver is fully compatible with the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. How to use DriverMax to install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 driver

The advantage of using DriverMax is that it will setup the driver for you in just a few seconds and it will keep each driver up to date, not just this one. How can you install a driver with DriverMax? Let's follow a few steps!

1. Start DriverMax and click on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to scan and analyze each driver on your PC.
2.  
3. Take a look at the list of detected driver updates. Search the list until you locate the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10 driver. Click the Update button.
4.  
5. That's it, you installed your first driver!
6.