LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 how to download and install the driver

Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 is a SCSI Adapter hardware device. The developer of this driver was LSI Corp.. The hardware id of this driver is PCI/VEN_1000&DEV_0073&SUBSYS_00B01137; this string has to match your hardware.

1. Manually install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 driver

1. You can download from the link below the driver setup file for the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 driver. The archive contains version 6.713.06.00 released on 2017-01-11 of the driver.
2.  
3. Start the driver installer file from a user account with administrative rights. If your UAC (User Access Control) is enabled please confirm the installation of the driver and run the setup with administrative rights.
4.  
5. Go through the driver setup wizard, which will guide you; it should be pretty easy to follow. The driver setup wizard will analyze your PC and will install the right driver.
6.  
7. When the operation finishes shutdown and restart your computer in order to use the updated driver. As you can see it was quite smple to install a Windows driver!
8.  

This driver is digitally signed by the manufacturer.
The file size of this driver is 207027 bytes (202.17 KB)
This driver was rated with an average of 4.1 stars by 57173 users.
This driver was released for the following versions of Windows:

• This driver works on Windows 2000 64 bits
• This driver works on Windows Server 2003 64 bits
• This driver works on Windows XP 64 bits
• This driver works on Windows Vista 64 bits
• This driver works on Windows 7 64 bits
• This driver works on Windows 8 64 bits
• This driver works on Windows 8.1 64 bits
• This driver works on Windows 10 64 bits
• This driver works on Windows 11 64 bits

2. Using DriverMax to install LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 driver

The most important advantage of using DriverMax is that it will install the driver for you in just a few seconds and it will keep each driver up to date. How easy can you install a driver with DriverMax? Let's take a look!

1. Start DriverMax and press on the yellow button that says ~SCAN FOR DRIVER UPDATES NOW~. Wait for DriverMax to analyze each driver on your computer.
2.  
3. Take a look at the list of available driver updates. Search the list until you locate the LSI Corp. Cisco UCSC RAID SAS 2008-8i for C220 with RAID 0/1/10/5/50 driver. Click the Update button.
4.  
5. Finished installing the driver!
6.